Sony STRDN1020 User Manual

D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STR-
DN1020-CEL.fm

STR-DN1020

4-273-051-14(1)

Before connecting the antennas (aerials), be 
sure to disconnect the AC power cord (mains 
lead).

• To prevent noise pickup, keep the AM loop 

antenna (aerial) away from the receiver and other 
equipment.

• Be sure to fully extend the FM wire antenna 

(aerial).

• After connecting the FM wire antenna (aerial), 

keep it as horizontal as possible.

Configuring your home network with DLNA-
compliant devices.
If your server (a computer, etc.) is connected to 
the Internet, you can connect this receiver to 
the Internet as well, through the wired LAN 
connection.

The method used to connect your server (a 
computer, etc.) to the Internet depends on the 
devices, your ISP, your server, and the router used.

The following system environment is required 
to use the Home Network, Music Services, and 
PARTY STREAMING functions of the 
receiver.

A Broadband line connection
A Broadband line connection to the Internet is 
required in order to listen to Music Services 
and to update the software of the receiver.

Modem
This is the device that is connected to the 
broadband line to communicate with the 
Internet. Some of these devices are integrated 
with the router.

Router
• Use a router compatible with 100 Mbps or 

greater transmission speeds to enjoy content 
on your home network.

• We recommend that you use a router 

equipped with the built-in DHCP (Dynamic 
Host Configuration Protocol) server.

 

This function automatically assigns IP 
addresses on the LAN.

FM wire antenna (aerial) (supplied)

AM loop antenna (aerial) 
(supplied)