Sony STRDN1020 User Manual

D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STR-
DN1020-CEL.fm

STR-DN1020

4-273-051-14(1)

 

You can customize the Auto Calibration by 
selecting the calibration type you want.

The menu is displayed on the TV screen.

V/v repeatedly to select 

b.

The Settings menu list appears on the TV 
screen.

V/v repeatedly to select 

b.

B/b repeatedly to select 

V/v repeatedly to select 

• Full Flat: Makes the measurement of 

frequency from each speaker flat.

• Engineer: Sets to “the Sony listening 

room standard” frequency 
characteristics.

• Front Reference: Adjusts the 

characteristics of all the speakers to 
match the characteristics of the front 
speaker.

• Off: Sets the Auto Calibration equalizer 

level and the A.P.M. (Automatic Phase 
Matching) function to off. 

Set the calibration type to “Off” if you want to 
decode DTS 96/24 audio format.

The network settings for the receiver must be 
set correctly to use the network functions of 
the receiver.

The procedure used to set up the IP address 
automatically (DHCP) is explained below.
In this case, the router that is connected to the 
receiver or the Internet provider must support 
DHCP.

The menu is displayed on the TV screen.

V/v repeatedly to select 

b.

V/v repeatedly to select 

V/v repeatedly to select 

V/v repeatedly to select 

V/v/b,  

MENU

HOME 

NETWORK