Sony STRDN1020 User Manual

Page of 132
98
GB
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STR-
DN1020-CEL.fm
masterpage: Left
STR-DN1020
4-273-051-14(1)
HDMI Settings menu
You can make the required settings for 
equipment connected to the HDMI jack.
Ctrl for HDMI (Control for HDMI)
Lets you turn the Control for HDMI function 
on or off. For details, see “Preparing for the 
“BRAVIA” Sync” (page 82).
• ON
• OFF
Note
When you set “Ctrl for HDMI” to “ON”, “Audio 
Out” may be changed automatically.
Pass Through
Lets you output the HDMI signals to the TV 
even when the receiver is in standby mode.
• ON: When the receiver is in the standby 
mode, the receiver continuously outputs 
HDMI signals from the receiver’s HDMI 
TV OUT jack.
• AUTO: When the TV is turned on while the 
receiver is in the standby mode, the receiver 
outputs HDMI signals from the receiver’s 
HDMI TV OUT jack. Sony recommends 
this setting if you use a “BRAVIA” Sync 
compatible Sony TV. This setting saves 
power in the standby mode when compared 
with the “ON” setting.
• OFF: The receiver does not output HDMI 
signals when the receiver is in the standby 
mode. Turn on the receiver to enjoy the 
connected equipment’s source on the TV. 
This setting saves power in the standby 
mode when compared with the “ON” 
setting.
Notes
• This function is not available when “Ctrl for 
HDMI” is set to “OFF”.
• When “AUTO” is selected, it may take a little more 
time for the image and sound to be output to the TV 
than when “ON” is selected.
• When the receiver is in standby mode, 
 
“A. STANDBY” appears on the display panel if 
“Pass Through” is set to “AUTO” or “ON”. 
However, “A. STANDBY” will disappear when 
“Pass Through” is set to “AUTO” and no signals 
are detected.
Audio Out
Lets you set the HDMI audio signals from the 
playback equipment connected to the receiver 
via an HDMI connection.
• AMP: The HDMI audio signals from the 
playback equipment are only output to the 
speakers connected to the receiver. Multi 
channel sound can be played back as it is.
Note
Audio signals are not output from the TV’s 
speaker when “Audio Out” is set to “AMP”.
• TV+AMP: The sound is output from TV’s 
speaker and the speakers connected to the 
receiver.
Notes
• The sound quality of the playback equipment 
depends on the TV’s sound quality, such as the 
number of channels, and the sampling 
frequency, etc. If the TV has stereo speakers, the 
sound output from the receiver is also in stereo as 
that of the TV, even if you play back multi 
channel source.
• When you connect the receiver to an image 
display equipment (projector, etc.), sound may 
not be output from the receiver. In this case, 
select “AMP”.
• When you select the input that you have assigned 
the HDMI input, sound does not output from the 
TV.
HDMI Assign
Lets you reassign the HDMI input jacks. For 
details, see “HDMI input assign” (page 87).