Casio pmn User Manual

Some video devices are equipped with a component video output terminal. You can use an 
optionally available component video cable (YK-3) to connect the RGB input terminal of the 
projector to the component video output terminal of a video device.

z Always turn off the projector and the video device before connecting them.

z Component video output terminals come in 3-terminal sets: Y·Cb·Cr or Y·Pb·Pr. Be sure to 

match the colors of the plugs on the optional YK-3 component video cable with the colors 
of the terminals (Green: Y; Blue: Cb/Pb; Red: Cr/Pr).

z You can use the optional YK-3 component video cable to connect to pin jack (RCA) type 

component video output terminals. The projector does not support connection to any other 
type of terminal.

z Note that connection only to an analog component video output terminal is supported. 

Connection to a digital output terminal is not supported.

z In order to connect to a component video terminal, you must use the setup menu to 

configure input settings. For details, see “Input Settings 

J RGB Input” on page 42.

Projector

Video device

RGB input terminal

AUDIO input terminal

Commercially available audio cable

Optional component video cable 
(YK-3)

To AUDIO output 
terminal

To Component video 
output terminal