Casio XJ-A250V User Manual

POWER

: Amber flashing  

Red steady

Power has turned off automatically due to a fan problem. Confirm that the 
POWER/STANDBY indicator is lit red (without flashing) and that the fan 
has stopped. After checking the POWER/STANDBY indicator, disconnect 
the power cord from the projector and wait for all of the projector’s 
indicators to go out. Next, reconnect the power cord and turn projector 
power back on.
If the error occurs again when you turn power back on, contact your 
retailer or nearest authorized CASIO Service Center.

TEMP

: Red steady

LIGHT

: Red steady

Message

: There is a problem with 

the fan. The projector will 
turn off.

POWER

: Amber flashing  

Red steady

Power has turned off automatically due to a system problem. After 
confirming that the POWER/STANDBY indicator is lit red (without 
flashing), disconnect the power cord from the projector and wait for all of 
the projector’s indicators to go out. Next, reconnect the power cord and 
turn the projector back on.
If the error occurs again when you turn power back on, contact your 
retailer or nearest authorized CASIO Service Center.

TEMP

: Red steady

LIGHT

: –

Message

: A system problem has 

occurred. The projector 
will turn off.

POWER

: Green steady

A system problem has occurred, which may cause problems with some 
functions. Turn off the projector, disconnect the power cord from the 
projector and wait for all of the projector’s indicators to go out. Next, 
reconnect the power cord and turn the projector back on.
If the error occurs again when you turn power back on, contact your 
retailer or nearest authorized CASIO Service Center.
Press the [ESC] key to clear the warning message.

TEMP

: –

LIGHT

: –

Message

: A system problem has 

occurred. Normal 
projection is not possible.

POWER

: Green steady

TEMP

: –

LIGHT

: –

Message

: There is some problem 

with the system.
The audio function may 
not operate correctly.

POWER

: Green steady

The USB connection was terminated because of a problem with the USB 
port. To use the USB function, turn off the projector and then turn it back 
on again.
If the error occurs again when you turn power back on, contact your 
retailer or nearest authorized CASIO Service Center.
Press the [ESC] key to clear the warning message.

TEMP

: –

LIGHT

: –

Message

: There is a problem with 

the USB port.

POWER

: Green steady

Zoom and focus cannot be performed due to some trouble in the optical 
drive circuit. Turn off the projector and then turn it back on again.
If the error occurs again when you turn power back on, contact your 
retailer or nearest authorized CASIO Service Center.
Press the [ESC] key to clear the warning message.

TEMP

: –

LIGHT

: –

Message

: Zoom and focus cannot 

be performed for some 
reason. Try turning the 
projector off and then 
back on again.
If this message reappears, 
request servicing.