A&D AD-4212B-101/102/201/301 User Manual
41
Confirming the date
6 The current date is displayed with all the digits blinking.
To change the display order of year (y), month (n)
and day (d), press the MODE key. The date is
output in the order as specified.
output in the order as specified.
When the date is correct and the operation is to be
finished, press the CAL key and proceed to step 8.
When the time is to be confirmed again, press the
SAMPLE key and go back to step 4.
SAMPLE key and go back to step 4.
When the date is not correct and is to be changed,
press the RE-ZERO key and proceed to step 7.
Note
The year is expressed using a two-digit format. For
example, the year 2001 is expressed as “01”.
The year is expressed using a two-digit format. For
example, the year 2001 is expressed as “01”.
Setting the date (with part of the digits blinking)
7 Set the date using the following keys.
SAMPLE key
To select the digits to change the
value. The selected digits blink.
RE-ZERO key
To increase the value by one.
MODE key
To decrease the value by one.
PRINT key
To store the new setting, display
1
end
1
and go to step 8.
CAL key
To cancel the new setting and go
to step 8.
Quitting the operation
8 The balance displays the next menu of the function
table. Press the CAL key to exit the clock and calendar
function and return to the weighing mode.
function and return to the weighing mode.
Notes
Do not enter invalid values such as a non-existing date when setting the time and date.
When the clock backup battery has been depleted, the balance displays rtc pf . Under
this condition, press any key and set the time and date. The dead battery only affects the
clock and calendar function. Even so, the function works normally as long as the AC
adapter is connected to the balance.
this condition, press any key and set the time and date. The dead battery only affects the
clock and calendar function. Even so, the function works normally as long as the AC
adapter is connected to the balance.