Pitney Bowes SV62214 User Manual

Page of 160
1-8
 
1 • Introduction
 
SV62214 Rev. A
Important  Safety Notes
Follow the normal safety precautions for all of fice equipment.  
• 
Please read all instructions before you attempt to op er ate the 
system. Save these in struc tions for future use.
• 
Use the power cord supplied with the ma chine and plug it into 
a properly ground ed wall outlet that's lo cat ed near the machine 
and easily accessible.  Failure to properly ground the machine 
can result in se vere per son al injury and/or fire.
• 
The power cord wall plug is the primary means of dis con nect ing 
the machine from the AC supply. The unit is on whenever it is 
plugged into a live re cep ta cle, even though the operator display 
may be blank. 
• 
Place the mailing machine base close to an easily ac ces si ble 
wall out let. DO NOT use a wall outlet con trolled by a wall switch 
or one that is shared with oth er equipment.
• 
Do not use an adapter plug on the line cord or wall out let.
• 
Do not remove the ground pin from the line cord.
• 
Make sure the area in front of the wall outlet into which the ma-
chine is plugged is free from ob struc tion.
• 
DO NOT route the power cord over sharp edges or trap it be-
tween pieces of fur ni ture. Make sure there is no strain on the 
power cord.
• 
To reduce the risk of fire or electrical shock, DO NOT attempt to 
re move covers or disassemble the control panel or its base. The 
cab i net encloses hazardous parts. If you should drop or other-
wise dam age the unit, call Pitney Bowes. 
• 
Keep fingers, long hair, jewelry and loose clothing away from 
moving parts at all times. 
• 
Keep your hands out of the ink cartridge refill holder. 
• 
Avoid touching moving parts or materials while the  ma chine is in 
use. Before clear ing a stall (jam), be sure ma chine mechanisms 
come to a complete stop. 
• 
When removing stalled material, avoid using too much force to 
pro tect against minor personal injury and dam age to the equip-
ment.
• 
Use the equipment only for its intended purpose.
• 
Always follow the specific occupational safety and health 
standards prescribed for your workplace.