Pitney Bowes B702 User Manual

You can also select a preset postage value by pressing one 
of the four memory keys—Memory 1, Memory 2, Memory 
3, Memory 4. The factory defaults for these keys are:

• 

Memory 1—First Class Letter, 1 oz.

• 

Memory 2—First Class Letter, 2 oz.

• 

Memory 3—Express Mail

• 

Memory 4—Priority Mail

When the preset value appears in the display bracketed by 
three bars, the meter is ready. Process mail as described 
earlier.

NOTE:  You can program each memory key  to store a specifi c 
postage value, advertising slogan and inscription. See the setup 
instructions in Chapter 4. 

2.  If you make a mistake or change your mind, press C to 

clear the entry. The display shows “_”.  Enter the amount 
you want.

3.  If the display shows “Insuf Funds,” the postage amount 

you selected is more than the funds available in the me-
ter. In this case, you may want to refill the meter. See 
Chapter 5 for instructions. You may also select a smaller 
amount of postage and continue processing mail.

4.  If the display shows “High Value” alternately with the 

postage amount selected, the meter is warning you the 
postage value is more than the high limit specified in the 
user setup mode. If you want to accept the high value, 
press Enter.

5.  The meter is ready to 

use when the postage 
value you selected is 
shown bracketed by 
three bars. Process 
your mail as explained earlier. The display returns to the 
default value after the meter has been inactive for a cer-
tain period of time. 

HINT:  The ad slogan 
and inscription called 
up by the memory key 
remain selected even 
if you enter a differ-
ent postage value. To 
clear this, wait until the 
meter times out or turn 
it off, then on.