Pitney Bowes B702 User Manual

The default inscription is automatically selected when you 
first turn the meter on and after it has been inactive for a pe-
riod of time. You can change the default as follows: 

1.  The display prompts “Set Inscrpt  Default?”

2.  Press Yes.

3.  The display prompts “Enter Insc Number.”

4.  Key in the code number of the default inscription using 

the number keys and press Enter. (If the number you en-
ter isn't valid—the inscription isn't  available—the meter 
displays “No Inscript” for one second and returns to the 
“Set Inscrpt Default” prompt.

NOTE:  Inscriptions are options purchased at the time of 
your initial order or afterwards from the PB Supply Line™. 
See the Appendix for a list of available inscriptions and their 
code numbers. 

5.  The display prompts “Inscrpt Set” and the meter goes to 

the next item in the setup menu.

The meter selects the default account automatically when 
you first turn it on and after it's been inactive for a while. You 
can change the default account as follows: 

1.  The display prompts “Set Account Default?”

2.  Press Yes.

3.  The display shows the current default account name. 

4.  Press No repeatedly to cycle through the available ac-

count names or key in the account ID number and press 
Enter. (Account ID numbers range from 1 to 10. If you 
have the optional Electronic Interface Unit [“Datalink”], 
they range from 1 to 100.)

NOTE:  If the meter can't accept the number you enter, it will 
prompt “Error” and return you to the “Set Account Default?” 
prompt.

5.  When you’ve selected the account name you want, press 

Enter.

6.  The meter prompts “Account Set” and moves to the next 

item in the setup menu.

NOTE: This menu 
item is not available 
when the password 
feature—Menu Item 
24—is enabled.