Pitney Bowes B702 User Manual

Moistener 
(B700 Only) 
(continued)

1.  Pour E-Z Seal

®

 solu-

tion into the fill hole of 
the moistener brush 
assembly. 

2.  Fill until the solution 

level reaches the top 
of the sight glass. DO 
NOT overfill.

NOTE:  You can use 
tap water in the moist-
ener. But we strongly 
recommend that, for 
best results, you use 
E-Z Seal

®

 instead. It 

prolongs the life of the 
moistener brush and 
reduces maintenance 
requirements.

1.  Select the postage 

value you want, just as 
you normally would.

2.  Open the envelope flap 

and feed it under the 
moistener brush as-
sembly as shown. 

3.  Guide the envelope up 

against the rear wall 
and to the right until its 
lead edge reaches the 
trip mark on the meter's 
deck. 

4.  The meter will then convey the envelope through the 

printer and into the stacker.

5.  To fully seal some flaps, you may have to compress the 

mailpiece by hand after metering.