Star Micronics NX-2460C User Manual

In addition to the Windows 3.1 driver, the 3.5” floppy disk drive that comes with 
this printer also contains a User Setup Utility that gives you total control over a 
variety of printing features and functions. In this chapter you will learn about:

❏ Installing the User Setup Utility
❏ Starting up the User Setup Utility
❏ Editing setup data
❏ Saving and loading and setup data
❏ Exiting the User Setup Utility and sending the settings to the printer

All the procedures in this chapter assume that you are using a mouse and that 
you are familiar with common mouse operations like click and double-click. If 
you need information on mouse operations, see your computer manual. If you 
want to operate the User Setup Utility without using a mouse (using function 
keys, arrow keys, and the tab key) refer to the key function explanations at the 
bottom of each User Setup Utility screen.

❏ Insert the disk that contains the User Setup Utility into one of your 

computer’s disk drives. This explanation assumes you are using the A: 
drive, but you could use any drive. Just remember to change the “A:” drive 
name specifications in the following steps to the name of the drive you are 
using.