Star Micronics 4000 User Manual
18
Printer command languages
This printer can receive data and interpret command languages through two standard
command interpreters and also by directly using your computer's processing power. Those
languages are 1) PostScript; 2) PCL and 3) Windows Direct.
command interpreters and also by directly using your computer's processing power. Those
languages are 1) PostScript; 2) PCL and 3) Windows Direct.
It is strongly recommended that you use permanent virtual memory, rather than tempo-
rary. This can be changed through the Control Panel by following the steps below.
rary. This can be changed through the Control Panel by following the steps below.
If you have not already designated the amount of virtual memory needed to run this
printer with the current amount of RAM on your computer, or if you wish to convert to
permanent virtual memory, do it now by using the Control Panel. These instructions
assume that your system has a minimum of 4 MB of RAM and is running Windows 3.1
in Enhanced mode.
printer with the current amount of RAM on your computer, or if you wish to convert to
permanent virtual memory, do it now by using the Control Panel. These instructions
assume that your system has a minimum of 4 MB of RAM and is running Windows 3.1
in Enhanced mode.
Steps:
1. Switch to the Program Manager.
2. Double-click on the Main group icon
2. Double-click on the Main group icon
in the Program Manager.
3. Double-click on the Control Panel icon
in the Main group.
4. Double-click on the 386 Enhanced
icon.
5. Click on the Virtual Memory button.
6. If the type is Temporary or None, click
on the Change button.
7. Select Permanent from the Type menu
under New Settings. (An X should
appear in this box.)
appear in this box.)