Source Technologies ST9530 User Manual

Secure MICR Printer User’s Guide 

 

 

© Source Technologies 

September 2005 

22

 

 

All Rights Reserved 

 

&%STL 

Lead in sequence 

xxxxx 

Resource number in decimal, must be 5 digits 

yyyyyy 

Byte count of resource file in Hex, must be 6  positions 

z 

Format of the resource file 

 

    S = Single byte binary format 

 

    D = Double byte text format 

dd...dd 

Flash resource file. e.g.  forms overlay, signatures etc. 

 
Resource number values may be between 00001 to 32767.  Values of 10000 and above 
are password protected and will require the user to enter MICR mode with a valid password 
before they can be unlocked with the STP command.  Values below 10000 will be 
unsecured.   
 
Resource number 5001 is reserved for the Audit Trail overlay, see chapter 7. 
 

 

&%SFF 

Lead in sequence 

$ Command 

terminator 

 
This command formats flash memory.  A valid password command must precede this 
command. 
 
Caution:  All flash contents will be lost. This includes all electronic forms, signatures, logos, 
etc.  
 

 

&%STP 

Unlock flash resource command 

xxxxx 

Flash resource number, must be 5 digits 

$ Command 

terminator 

 
Unlocks a secure flash resource.   
 

 

&%STTL 

Lock tray command 

# 

The tray to be locked  (choose from 1, 2 or 3 only) 

$ Command 

terminator 

 
This command prevents other applications from accessing a particular printer paper tray.