Star Micronics 150 User Manual
Programmer's Guide
PcOS Series 150
General Specifications
12/14/99
Rev G
Page 7
The following illustration shows a single-wide character cell.
1 3 5 7 9 11
2 4 6 8 10 12
Full Dots
Half Dots
Descender (Row 8 & 9)
& Underline (Row 9)
Character
Spacing
1
2
3
4
5
6
7
8
9
1 3 5 7 9
2 4 6 8 10
Character
Spacing
1
2
3
4
5
6
7
8
9
High Speed Draft
Utility Mode
Figure 1 Single-wide character cell
The example above, which only holds true for the 12 cpi mode, shows the full dots as
adjacent to each other in the character cell. The 10 cpi mode allows a gap between adjacent
full rows; 17 and 24 cpi allow an overlap of full rows. The printer cannot print adjacent full
and half dots in any single row. Some graphics (double-density, half-speed) allow adjacent
rows to be printed by slowing the print speed by half. Slowing the print speed allows the time
between half and full columns to be the same as the time between full columns in full-speed
operation.
adjacent to each other in the character cell. The 10 cpi mode allows a gap between adjacent
full rows; 17 and 24 cpi allow an overlap of full rows. The printer cannot print adjacent full
and half dots in any single row. Some graphics (double-density, half-speed) allow adjacent
rows to be printed by slowing the print speed by half. Slowing the print speed allows the time
between half and full columns to be the same as the time between full columns in full-speed
operation.
The following illustration shows the use of full and half dots as well as descenders to form
characters.
characters.
1 3 5 7 9
2 4 6 8 10
1 3 5 7 9
2 4 6 8 10
1 3 5 7 9
2 4 6 8 10
1
2
3
4
5
6
7
8
9
Figure 2 Character forming