Star Micronics 150 User Manual
General Specifications
PcOS Series 150
Programmer's Guide
Page 10
Rev G
12/14/99
Receipt/Journal Paper
Paper-feed method
Friction feed
Paper-feed pitch
Default - 0.13 inch (1/8 inch or 3.18 mm); can be set in units of
0.0046 inch (1/216 inch or 0.12 mm) by software command
0.0046 inch (1/216 inch or 0.12 mm) by software command
Paper width
2.75, 3.00, or 3.25 inches (69.85, 76.20, 82.55 mm)
Roll diameter
3.50 inches (88.90 mm)
Paper thickness at 25
°
C
Two-ply
0.006 - 0.007 inch (0.15 - 0.18 mm)
Three-ply
0.009 - 0.0105 inch (0.23 - 0.27 mm)
Roll paper core
Inside diameter 0.44 inch (7/16 inch or 11.11 mm)
Roll footage (typical)
Two-ply
110 feet (3353 cm)
Three-ply
70 feet (2134 cm)
Receipt-paper out
Paper exhaust is sensed by software, and printing is prevented at the
end of the roll.
end of the roll.
Printable Area
Receipt Printing
1.00 inch (25.4 mm)
0.46 inch (11.68 mm)
2.34 inches
(59.44 mm)
3.25 inches
(82.55 mm)
Paper tear-off
Figure 4 Receipt printable area
Receipt Printing with the Autocutter
The paper is cut one inch from the last line of print, which minimizes the wasted paper
required when the paper must be moved to the cut-off position.
required when the paper must be moved to the cut-off position.
Validation Forms Printing
Lines per inch (lpi)
Lines
8
16
6
12
Table 4 Validation lines