Star Micronics 150 User Manual
Control Codes
PcOS Series 150
Programmer's Guide
Character Attributes
Page 34
Rev G
12/14/99
Function
Multiline double-wide and double-high
ASCII
[ESC] W <n>
Hexadecimal
1BH 57H <n>
Decimal
<27> <87> <n>
IPCL
&%FD, &%FS, &%FH (Note: Single-wide, double-high print is not available
in IPCL).
in IPCL).
EPOS
[ESC] ! <n>
Description
This command controls multiline double-wide or double-high mode.
Where
n
specifies the mode
0
begins standard single-wide and single-high
&%FS
1
begins double-wide
&%FD
2
begins double-high
none
3
begins double-wide, double-high
&%FH
Note: This command does not affect line spacing.
EPOS Note: [ESC] ! <n> performs a similar function; however, NLQ is not
available.
available.
Where n-bits
76543210
Function
1-------
Underline
--1-----
Double-wide
---1----
Double-high
-------X
Font: 1 = Utility, 0 = HSD
Function
Set print style: double-wide, double-high, italic control
ASCII
[ESC] [ @ [EOT] [NUL] <k> [NUL] <n> <m>
Hexadecimal
1BH 5BH 40H 04H 00H <k> 00H <n> <m>
Decimal
<27> <91> <64> <04> <0> <k> <0> <n> <m>
IPCL
&%DH Double-high, double-wide, and double-space
&%SH Single-high, single-wide, and single-space
Also, see [ESC] W.
&%SH Single-high, single-wide, and single-space
Also, see [ESC] W.
Description
This command sets double-wide, double-high, and italic print mode.
Where
k-bits
76543210
----xxxx
Italic control
0
----0000
No change
1
----0001
Italic On
2
----0010
Italic Off
Where
n-bits
76543210
----xxxx
Height multiplier
0
----0000
No change
1
----0001
Single high
2
----0010
Double high
xxxx----
Line spacing
0
0000----
No change
16
0001----
Single line feed
32
0010----
Double line feed
Where
m-bits
76543210
----xxxx
Width multiplier
0
----0000
No change