Star Micronics 150 User Manual

Rotated Print

Page 44

Rev G

12/14/99

[ESC] u <n

1

> <m

1

> <n

2

> <m

2

> ... <n

i

> <m

i

> <0>

1BH 75H <n

1

> <m

1

> <n

2

> <m

2

> ... <n

i

> <m

i

> 00H

<27> <117> <n

1

> <m

1

> <n

2

> <m

2

> ... <n

i

> <m

i

> <0>

none

none

This command adjusts the line spacing for each rotated print line where n

i

 is

the line number and m

i

 is the spacing in dot columns (1/80 inch) from the

previous line.

For the first print line, the distance is calculated from the margin. An n

i

 value

of 0 is used to terminate the command. Any unspecified spacing will be set to
one. This allows data to be accurately positioned on an inserted form. These
values will be used as a template for all subsequent rotated print. On power up,
all spacing is preset to 1/80 inch (n = 1, 8 lines per inch) for all lines. This
command is only effective in 90° and 270° rotation. It will remain in effect
until a new table is received or until the printer is power cycled. An [ESC] u
<0> will have the effect of setting all lines to one. This table can be overridden
by [LF] or [ESC] J <n> commands in the rotated print data.

The value of m can be from one to 127; n can be from one to 22.

Table 12 on 40 specifies the line spacing for this command.

S e c o n d   lin e  

T h i r d   lin e  

E d g e   o f fo r m  

L e ft m a r g i n  

n = 1 ,   m  

n = 2 ,   m  

F i r s t   l i n e