Toshiba EO1-33027E User Manual
Appendix 5 System Mode
94
Adjust the X-coordinate.
After entering the value, press the PAUSE key. The message
returns to “<2> PARAMETER SET”.
After entering the value, press the PAUSE key. The message
returns to “<2> PARAMETER SET”.
Adjusting Print Density (HEAD 1 and HEAD 2)
Press the PAUSE key. “POSITION” appears. Press the FEED
key.
key.
Print density adjustments are ready to be set. Press the PAUSE key.
Adjust the print density of the color for Head 1.
After selecting the value, press the PAUSE key.
After selecting the value, press the PAUSE key.
Adjust the print density of the color for Head 2.
After selecting the value, press the PAUSE key.
When the values for both colors are entered, press the PAUSE
key. The message returns to “<2> PARAMETER SET”.
After selecting the value, press the PAUSE key.
When the values for both colors are entered, press the PAUSE
key. The message returns to “<2> PARAMETER SET”.
Notes:
•
Use the FEED key for lighter
density, or the RESTART key for
darker density.
density, or the RESTART key for
darker density.
•
The acceptable print density values
are -50 to +50.
are -50 to +50.
•
The print density value is +0 at
shipment from the factory.
shipment from the factory.
POSITION
PRINT DENSITY
HEAD1 +3
HEAD2 +3
X-Coordinate (-99.5mm to +99.5mm)
X ADJUST +50.0mm
X Y Z
-
+
Note:
See A5.7.5 for more detail.