Toshiba EO1-33027E User Manual
Chapter 2 Printer Installation
27
(A)
(B)
1 Remove the Ribbon Guide Lever from the Ribbon Cassette by
removing the screw.
2 Fit the bosses on the Sheet Fixing Plate into the holes of the Ribbon
Tension sheet and the aluminum frame. Secure them with the
three D-3x5 screws.
three D-3x5 screws.
Note:
Do not reinstall the Ribbon guide
Lever, Ribbon Guide Lever Shaft and
the D-3x6 screw because they are not
used after the ribbon tension sheet
has been installed.
Lever, Ribbon Guide Lever Shaft and
the D-3x6 screw because they are not
used after the ribbon tension sheet
has been installed.
Ribbon Cassette
Aluminum Frame
Ribbon Guide Level
Ribbon Guide
Level Shaft
Sheet Fixing Plate
Bosses
D-3x6
D-3x5
(A)
(B)
Ribbon Tension Sheet