Toshiba B-SA4T User Manual

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT

EO15-33001A

2. Strip Module

2- 3

5. Secure the Strip Unit to the printer with the two screws. Make sure that the Feed Roller Gear rotates

smoothly.

6. Close the Strip Unit.

7. Connect the Strip Harness to the connector at the front of the printer. At this time, carefully avoid contact

of the strip harness with the gears.

8. Close the Strip Module Cover.

Perform an operation check for a proper strip issue.

•

Media loading procedure------------- Owner’s Manual, Section 2.3

•

Operation check------------------------ Owner’s Manual, Section 2.9

•

System mode setting------------------ System Mode Manual

•

Cleaning --------------------------------- Owner’s Manual, Section 4.1.4

SMW-3x6 Screw

Feed Roller Gear

Strip Unit

Connector

Strip Harness

Gear