Toshiba B-SA4TP SERIES User Manual
3. ON LINE OPERATION
ENGLISH VERSION EO1-33048
3.1 Operation Panel
E3- 1
3. ON LINE OPERATION
3.1 Operation Panel
This chapter describes usage of the keys on the Operation Panel in On
Line mode.
When the printer is in On Line mode and connected to a host computer,
the normal operation of printing images on labels or tags can be
accomplished.
The figure below illustrates the Operation Panel and key functions.
Line mode.
When the printer is in On Line mode and connected to a host computer,
the normal operation of printing images on labels or tags can be
accomplished.
The figure below illustrates the Operation Panel and key functions.
The LCD Message Display shows messages in alphanumeric characters
and symbols to indicate the printer’s current status. Up to 32 characters
can be displayed on two lines.
There are two LEDs on the Operation Panel.
and symbols to indicate the printer’s current status. Up to 32 characters
can be displayed on two lines.
There are two LEDs on the Operation Panel.
LED
Illuminates when…
Flashes when…
ON LINE
The printer is ready to
print.
print.
The printer is
communicating with
your computer.
communicating with
your computer.
ERROR
Any error occurs with
the printer.
the printer.
The ribbon is nearly
over. (See NOTE 1.)
over. (See NOTE 1.)
There are three keys on the operation panel.
PAUSE
Used to stop printing temporarily.
RESTART
Used to restart printing.
FEED
Used to feed media.
NOTES:
1. Flashes only when the Ribbon
Near End Detection function is
selected.
selected.
2. Use the
[RESTART]
key to
resume printing after a pause,
or after clearing an error.
or after clearing an error.
LCD Message
Display
Display
ON LINE LED
(Green)
(Green)
ERROR LED
(Red)
(Red)
[PAUSE] key
[FEED] key
[RESTART] key