Toshiba H-9000N-US User Manual

9- 17

Menu Page: 1
Item No.:

9

The H-9000 has a maximum of 70×2 speed keys which are very convenient to call PLUs quickly.
(Refer to page 5-3 regarding the Key Layout.)

■

●

Department Number

When initial set #10-6 is set to  “1”, the six-digit PLU # is divided into two; the upper two digits are assigned to department #, and the lower

four digits to PLU.

The department # is automatically added in the front of the four-digit PLU # and treated as a six-digit PLU #.

In case of  “PROG.”,  “Report”, and  “Reset” modes, PLU # is treated as a six-digit number.  So the upper two digits are not treated

as department #.  Consequently the four-digit PLU # is available only in  “REG.”,  “M.DOWN”, and  “REWRAP” modes.

●

Vendor Number

Vendor numbers can be be set when the Initial Setting #11-1 is set to 1.

Vendor numbers are assigned to the speed keys in two ways:
① Individual vendor number:  00-39

Vendor # is assigned to the speed keys one by one.

② Group vendor number:  0-, 1-, 2- and 3-

Maximum 10 vendor numbers can be assigned to one speed key, resulting in 4 speed keys in total.  When assigning group vendor

numbers to the speed keys, enter the first digit of the vendor key (0, 1, 2 or 3) plus a bar (-).

Vendor numbres can be called whichever half of the speed keys are selected.

9

<MENU>

Page 1

Enter the Speed

Key number

(# 1∼70 on each page)

ENTER

PROG.

ESC.

<MENU>

Page 1

Main

<MENU>

i

i

Enter the PLU#.

(max. 6 dig.)

ENTER

NEXT

PLU

or

Toggles the speed
key Page

◇

9

<MENU>

Page 1

PROG.

ESC.

<MENU>

Page 1

Main

<MENU>

ENTER

AUTO
CODE

Enter the speed

key number.

Enter the default

department #.  (1∼99)

Enter the department #
 or vendor #.  (1∼99)

ENTER

◇

ENTER

Selecting items to be assigned
to speed keys.
(PLU #/VENDOR #/DEPT #/)