Toshiba B-EV4T User Manual

ENGLISH VERSION EO1-33087 

2.8 Loading the Ribbon

E2-15 

3. 

Push up the Ribbon Access Cover by the portions indicated by  

  arrows A and fully open it supporting the Print Head Block.

  

 

 

 
4.  Fit the Ribbon Take-up Roll to the Spring Guide Wheel and the Guide 

Wheel in the same way as the Ribbon Supply Roll.   

 

 

(1) Push the right side of the core of the Ribbon Take-up Roll against the 

Spring Guide Wheel and fit the wheel into the core.  

 

(2) Fit the left side of the core of the Ribbon Take-up Core to the Guide 

Wheel, aligning the notch of the ribbon core with the protrusion of the 
Guide Wheel.  

 
5.  Turn the Ribbon Rewind Gear to wind the ribbon leading film onto 

the Ribbon Take-up Core until the ink ribbon covers the Print Head, 
and remove any slack of the ribbon.   

 
 
 

Ribbon Access 
Cover 

Print Head 
Block 

Guide Wheel

Spring Guide Wheel 
(Take-up side) 

Ribbon  
Rewind Gear

 

 

Ribbon 
Take-up 
Core 

Ribbon Supply
Roll 

Print Head