Toshiba B-SV4T User Manual
APPENDIX 1 SPECIFICATIONS
ENGLISH VERSION EO1-33062
A1.3 Media
EA1- 3
A1.3.1 Media Type (Cont.)
Unit: mm (inch)
Issue mode
Item
Batch mode
Strip mode
Cut mode
c Width including backing paper
20 to 112 (0.8 to 4.4)
d Media width
17 to 109 (0.7 to 4.3)
Label
12 to 609.6 (0.5 to 24.0)
27.4 to 154.4
(1.1 to 6.1)
27.4 to 609.6
(1.1 to 24.0)
e Media pitch
Tag
10 to 609.6 (0.4 to 24.0)
-----
25.4 to 609.6
(1.1 to 24.0)
f Media length
10 to 607.6 (0.4 to 23.9)
25.4 to 152.4
(1.1 to 6.0)
25.4 to 607.6
(1.1 to 23.9)
g Gap length
Min. 2 (0.08)
Min. 6 (0.2)
h Black mark length
Min. 2 (0.08)
Thickness
0.06 to 0.19 (0.002 to 0.007)
Max. outer roll diameter
Ø127 (5)
Ø214 (8.4): When the optional External Media Roll Hanger is used.
Roll direction
Outside
Inner core diameter
25.4, 38.1, or 76.2 (1, 1.5, or 3)
(See NOTE 2.)
A1.3.2 Detection Area of the Transmissive Sensor
The Transmissive Sensor is positioned at 6 mm from the right edge of media.
The Transmissive Sensor detects a gap between labels, as illustrated below.
The Transmissive Sensor detects a gap between labels, as illustrated below.
NOTES:
1. To ensure print quality and print head life use only TOSHIBA TEC approved media.
1. To ensure print quality and print head life use only TOSHIBA TEC approved media.
2. When using a media roll of 76.2-mm (3”) inner core diameter, the 3”-Diameter Media Shaft included in the
optional External Media Roll Hanger is required.
Min. 2 mm
(Min. 6 mm:
cut mode)
(Min. 6 mm:
cut mode)
Min. 8 mm
Sensor position
Area to be detected.
Label
Gap
Label
Sensor position
Media feed direction
6 mm
Print side