Toshiba B-EX4T1 User Manual

ENGLISH VERSION EO1-33089 

2.6 Printer Setting

E2-39 

The USB Memory menu allows copying data from a USB memory to the 
printer and saving data from the printer to a USB memory. 

USB memory can be used only when an optional RTC & USB Host 
Interface Card, B-EX700-RTC-QM-R, is installed.  

This parameter is to copy data from a USB memory to the printer.   

 

•  COPIED DATA  Data 

including firmware (BOOT/MAIN/ 

CG/KANJI/HTML), storage area information, 
and parameter settings

 

•  CONFIG FILE 

File containing firmware 

(BOOT/MAIN/ 

CG/KANJI/HTML)

 

 

1.  When the file selection screen is displayed, choose a file to be copied. 
2.  The confirmation message is displayed. 
3.  The data is read from the USB memory.  It takes 3 to 5 minutes to 

read all information.  

 

This parameter is to save the firmware (BOOT/MAIN/CG/ 
KANJI/HTML), storage area information, and parameter settings to a 
USB memory.  

•  ALL 

 
1.  The confirmation message is displayed. 
2.  The data is copied to the USB memory.  It takes approx. 40 seconds to 

save all information.  

 
A file is automatically created in the USB memory and named in the 
following format based on the printer model and saved date. 

 /ATA0/SYSTEM/B-EX4T1-T1105.DAT 
  (e.g. B-EX4T Type1, 305 dpi model, November 5)  
 

SYSTEM MODE 

<10>RFID 
<11>RTC 
<12>Z-MODE