Toshiba B-SX4T-GS20-QM-R User Manual

 

- 148 -

 

Function 

Provides data for the outline font row. 

 Format c  [ESC] RVaa; bbb ------ bbb [LF] [NUL] 

 

 

d

  Link Field Data Command 

[ESC] RV; ccc ------ ccc [LF] ddd ------ ddd [LF] ------ [LF] xxx ------ xxx [LF] [NUL] 

 

Term 

aa: 

Character string number 

00 to 99 

 

 

bbb ------ bbb:  Data string to be printed   

Max. 255 digits   
Any excess data will be discarded. 
For the character codes, refer to chapter 12 “CHARACTER CODE 
TABLE”. 

 

 

ccc ------ ccc:  Data string of link field No. 1 

 

 

ddd ------ ddd:  Data string of link field No. 2 

 

 

                to 

 

 

xxx ------ xxx:  Data string of link field No. 99 

  Note: 

If the Outline Font Data Command is sent without entering any data string for the 
specified character string number (e.g. [ESC]RV00;[LF][NUL]), the previous data 
string of the same character string number (No. 00 in the case of the above 
example) is deleted.   

 

 

Explanation 

(1)  Link field data string 

 

 

 

•  After the link field No. is designated in the Format Command, data strings are 

linked using the Link Field Data Command to draw an image. 

 

 

 

•  Up to 255 digits of data strings can be linked.  Data exceeding the max. 

number of digits will be discarded. 

 

 

 

•  Up to 99 data strings can be linked. 

 

 

 

•  Up to 2048 bytes can be used as the command length ([ESC] to [NUL]) of the 

Link Field Data Command. 

 

 

 

•  When the data string is omitted in the Link Field Data Command, the following 

process is performed: 

 

 

 

  c  No process will be performed for the field which contains no print data due to 

the omission. 

 

 

 

  d When the field partially loses print data due to the omission, the only 

remaining data will be processed as print data. 

 

 

 

•  The Link Field Data Command can be used for the bit map font fields, outline 

font fields, and bar code fields. 
(The same result is obtained when any of the “RC,” “RV” or “RB” command 
code is designated.) 

 

Refer to 

Outline Font Format Command ([ESC] PV)