Toshiba B-SX4T-GS20-QM-R User Manual

Page of 374
 
- 191 -
6.3.18  STORAGE AREA ALLOCATE COMMAND 
[ESC] XF 
• For the firmware before V5.0 
 
Function 
Allocates the storage area in flash ROM on the CPU board. 
 
Format 
[ESC] XF; aa, bb, cc [LF] [NUL] 
 
Term 
aa:  Size of the TrueType font storage area 
00 to 14 (0 KB to 896 KB) 
(in units of 64 KB) 
 
 
bb:  Size of bit map writable character storage area 
00 to 14 (0 KB to 896 KB) 
(in units of 64 KB) 
 
 
cc:  Size of BASIC file storage area 
00 to 14 (0 KB to 896 KB) 
(in units of 64 KB) 
AA: The current BASIC file storage area and contents are retained. 
 
Explanation 
(1)  The storage area in flash ROM has a total capacity of 896 KB. 
 
 
In case that the size of BASIC file storage area is set in a range of “00” to “14”: 
 
 
(2)  When this command is received, the entire area in flash ROM on the CPU board is 
cleared. 
 
 
(3)  If this command is not sent, the storage area in flash ROM on the CPU board 
cannot be used. 
 
 
(4)  The storage areas are allocated in the following order of precedence – the 
TrueType font storage area, the bit map writable character storage area, and the 
BASIC file storage area.    After these storage areas are allocated, the remaining 
area is used for the PC save area. 
 
 
(5)  If the sum of the TrueType font storage area, the bit map writable character 
storage area, and the BASIC file storage area, specified by this command, is 896 
KB, the TrueType font storage area, the bit map writable character storage area, 
and the BASIC file storage area are allocated as specified, respectively.  In this 
case, however, there is no PC save area. 
 
 
(6)  If the sum of TrueType font storage area, the bit map writable character storage 
area, and the BASIC file storage area, specified by this command, exceeds 896 
KB, the TrueType font storage area is allocated as specified with the highest 
priority.  Then, the remaining area is allocated to the bit map writable character 
storage area.    If there is still remaining area after the TrueType font storage area 
and the bit map writable character storage area are allocated, it is used for the 
BASIC file storage area.    There is no PC save area. 
 
 
(7)  When “00” (0 KB) is specified for each of the TrueType font storage area, the bit 
map writable character storage area, and the BASIC file storage area, the storage 
area is not allocated. 
 
 
(8)  When “14” (896 KB) is specified for any of the TrueType font storage area, the bit 
map writable character storage area, and the BASIC file storage area, the entire 
storage areas are occupied by that area.    For example, if “14” is specified for the 
TrueType Font storage area, the entire storage areas are used for the TrueType 
Font storage area.  The bit map writable character storage area, the BASIC file 
storage area, and the PC save area cannot be allocated.