Toshiba B-SX4T-GS20-QM-R User Manual

- 218 -

6.3.25 SAVE START COMMAND (For Flash Memory) [ESC]

Function

Declares the start of saving PC interface commands.

(Places the printer in the mode where PC interface commands are written in flash
memory.)

Format

[ESC] XO; aa, (Sb, ) c [LF] [NUL]

Term

aa: Identification number to be used for saving in flash memory or calling

01 to 99

Sb: Drive in which the PC interface command is stored

(Omissible. If omitted, flash ROM on the CPU board is selected.)

Drive

0: Flash ROM on the CPU board

1: Slot 1 on the PCMCIA board (Option)

2: Slot 2 on the PCMCIA board (Option)

c: Status response at save time

0: No status response made
1: Status response made

Notes

(1) After sending the Save Start Command ([ESC] XO), any command other than the

following will be saved into flash memory without being analyzed.

•  Save Start Command ([ESC] XO)
•  Save Terminate Command ([ESC] XP)
•  Saved Data Call Command ([ESC] XQ, [ESC] XT)
•  Bit Map Writable Character Command ([ESC] XD, [ESC] XA)
•  Reset Command ([ESC] WR)
•  Status Request Command ([ESC] WS)
•  Flash Memory Format Command ([ESC] J1)
•  ATA Card Format Command ([ESC] JA)

(2) No error check is made for the commands at save time.

(3) Up to 64 KB can be saved per a save.

Refer to

• Save Terminate Command ([ESC] XP)

• Flash Memory Format Command ([ESC] J1)

Examples

[ESC] J1; B [LF] [NUL]

[ESC] XO; 01, 0 [LF] [NUL]

[ESC] D0508, 0760, 0468 [LF] [NUL]

[ESC] T20C30 [LF] [NUL]

[ESC] C [LF] [NUL]

[ESC] PC001; 0200, 0125, 1, 1, A, 00, B [LF] [NUL]

[ESC] PC002; 0650, 0550, 2, 2, G, 33, B, +0000000001 [LF] [NUL]

[ESC] XP [LF] [NUL]