Toshiba B-SX4T-GS20-QM-R User Manual

 

- 231 -

 

C:  Stored PC command save file 

SOH STX  “C”  Slot 

Stored PC command save file name

 

ETX EOT  CR

LF

01H 02H 43H xxH 

File name 1    00H    File name 2    00H ··· File name n   

00H 

03H 04H 0DH 0AH

 

 

 

 

 

In the following cases, 1 byte of “00H” is returned as the stored PC command save 
file name. 

 

 

 

c

  There is no file. 

 

 

 

d

  The ATA card has not been inserted in the specified slot. 

 

 

(2)  This command is one of the command types that are processed as they are 

received.    Processing takes place starting from the ones received first.    Until the 
process of the command previously sent is completed, this command is not 
processed.    Therefore, if the printer is not in the idle state when this command is 
sent, the information data may not be returned immediately. 

 

Note 

(1)  This command is effective only for the serial interface (RS-232C). 

File name (including extension): 
  “00H” should be placed between file 

names. 

Slot: 
  “1” (31H):  Slot 1 
  “2” (32H):  Slot 2