Manualsbrain.com
  1. Manuals
  2. Brands
  3. Toshiba
  4. B-SX5T SERIES
  5. User Manual

Toshiba B-SX5T SERIES User Manual

Download
Page of 56
2. PRINTER SETUP 
ENGLISH VERSION EO1-33036 
2.9 Inserting the Optional PCMCIA Cards
 
E2-14 
2.9  Inserting the Optional 
PCMCIA Cards 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
When the optional PCMCIA Interface Board is installed into the printer, 
there will be two PCMCIA slots available as shown in the figure below.  
This allows the use of Flash Memory type Cards or I/O Cards such as 
LAN Cards.  The following paragraphs outline how to insert PCMCIA 
cards. 
1.
  Make sure that the printer’s Power Switch is in the OFF position. 
2.
 Hold the PCMCIA Card so that the side with the model name faces 
left.  Insert the card into the proper slot until the Eject Button pops 
out. 
 
 
 
 
 
 
 
 
3.
  Slightly pull and fold the Eject Button upward.  
 
 
 
 
 
4.
  The following PCMCIA cards can be used. 
Type Maker  Description 
Remarks 
ATA Card 
San Disk,  
Hitachi 
A card conforming to the 
PC card ATA standard 
---------- 
LAN Card 
3 COM 
3CCE589ET Series 
Install into the slot (2) 
only.  (This card 
installed into the slot 
(1) will not work.) 
Maxell
 
     EF-4M-TB 
Maxell 
     EF-4M-TB 
Centennial 
Technologies INC. 
FL04M-15-11119-03 
Read/Write 
INTEL 
IMC004FLSA  
Simple 
TECNOLOGY 
STI-FL/4A 
Mitsubishi 
MF84M1-G7DAT01 
PC Card KING 
MAX 
FJN-004M6C 
Centennial 
Technologies Inc. 
FL04M-20-11138-67 
PC Card  
FJP-004M6R 
Flash Memory 
Card (4 MB) 
Mitsubishi 
MF84M1-GMCAV01 
Maxell 
     EF-1M-TB 
Flash Memory 
Card (1 MB) 
Mitsubishi 
MF81M1-GBDAT01 
Read (See NOTE.) 
 
CAUTION! 
1.  To protect PC cards, 
discharge static 
electricity from your body 
by touching the metal 
cabinet of the printer 
before touching the card. 
2.  Before inserting or 
removing a PCMCIA 
card make sure that the 
printer’s power is turned 
off. 
3.  Be sure to protect 
PCMCIA Cards when not 
in use by putting them 
into their protective 
covers. 
4.  Do not subject the card 
to any shocks or 
excessive force nor 
expose the card to 
extremes in temperature 
or humidity. 
5.  The card may be 
inserted into the slot 
halfway even in the 
wrong orientation.  
However, the slot is 
safety designed so that 
the card will not seat 
against the connector 
pins.  
Slot 2: 
(I/O type cards such as 
LAN cards) 
Slot 1: 
(Memory type cards only) 
Eject Button 
NOTE: 
Reading a read-only-type flash 
memory is possible if it has been 
used on the TOSHIBA TEC 
printer, such as B-472 and B-572. 
CC 
DC 
AA 
 
Model Name 
Printed Side 
Eject Button