Toshiba e-STUDIO161 User Manual

This chapter explains basic copying functions such as normal copying, reduction or enlargement, and exposure 
adjustment.

This section explains how to make a regular copy.
If "Auditing mode" has been enabled (p.39), enter your 3-digit account number.

Place the original face 
down on the document 
glass. Align it with the 
original size scale.

When the original size is 
selected, the tray with the 
same size of paper is 
automatically selected. 
(Two-tray model only)

● Make sure that the PAPER SIZE indicator lights up. 

If the indicator is not lit, no tray has the same size of 
paper as the original. Load paper of the required 
size in a tray, or select the bypass tray with the 
[TRAY SELECT] key (

) and copy from the 

bypass tray.

● The bypass tray must be manually selected.

● To copy on paper of a different size than the 

original, select the paper with the [TRAY SELECT] 
key (

).

● If the ORIGINAL SIZE indicator is blinking, rotate 

the original so that it is in the same orientation as 
the blinking ORIGINAL SIZE indicator.

The copy is delivered to 
the paper output tray. 

DO NOT place heavy objects on the 

original glass and do not press on it with 

force. Breaking the glass could cause 

personal injury.

An original up to A3 (LD) can be placed 

on the document glass.

• The paper output tray can hold up to 250 

sheets of paper.

• About one minute after copying ends, 

"Auto clear" activates and restores the 

copy settings to the initial settings. (p.12) 

The setting for "Auto clear" time can be 

changed in the user programs. (p.33)

• Press the [CLEAR] key (

) to stop 

copying in the middle of a run.