Toshiba TRST-56 SERIES User Manual

EO1-13016 

3.3 Connectors

3- 2 

 
 

 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 

c

[Interface connector]  (Serial interface model: D-SUB 25-pin Socket Connector,  
 

Parallel interface model: IEEE 1284-B receptacle) 

 

An interface cable which connects the printer to a POS terminal is connected to this connector.   
A Centronics interface cable (Parallel I/F model) or an RS-232C interface cable (Serial I/F model) 
is connected.   

 

d

 

A drawer cable which connects the printer to a drawer is connected to this connector.  To this 
connector, a TOSHIBA TEC drawer can be connected.  Do not connect anything other than the 
connectable drawer. 

 

NOTE:  For the connectable drawers, refer to your nearest authorised TOSHIBA TEC 

representative.  

 

e

  [DC24V]  (Socket connector) 

 

The built-in AC adapter supplies +24V power to the printer through this connector.  Do not connect 
anything other than the built-in AC adapter.  

 

f

 

The AC power cord is connected to this inlet.  

 

g

  [Ground terminal] 

 

The drawer interface cable’s ground wire is secured to this terminal.  

 

1. The drawer interface connector is exclusively for connecting the drawer.  Do not connect a

phone line or any other cables than the drawer cable to this connector.  Doing so may cause a
failure of the phone line and this printer. 

2. To the DC24V connector (socket connector), do not connect anything other than the built-in

AC adapter. 

3.  The built-in AC adapter is exclusively for this printer.  Do not use it for any other machines.  

 

d

 

e

f 

g 

c