Toshiba 452 User Manual
5 - 12
5
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO350/352/353/450/452/453
CONTROL PANEL
5.5 Disassembly and Replacement
Note: When taking off the control panel, check
the position of the stopper; if the stopper
is at the position “b”, remove the stopper
or move it to the position “a”.
is at the position “b”, remove the stopper
or move it to the position “a”.
Fig. 5-501
a
b
[A] Stopper
(1) Slide the stopper and pull it out.
(1) Slide the stopper and pull it out.
Fig. 5-502
Stopper
[B] Control panel unit
(1) Take off the right upper cover and the front
(1) Take off the right upper cover and the front
upper cover. ( Chapter 2.5.1 [I] [J])
(2) Disconnect 1 connector.
(3) Release the harness from 3 harness clamps.
(3) Release the harness from 3 harness clamps.
07/06
Fig. 5-503
(4) Lower the control panel and remove 4
screws.
(5) Take off the control panel unit while sliding
it.
Fig. 5-504