Toshiba B-570 User Manual

3-3

EM18-33010A

5.

Unclamp and disconnect the connector for the strip sensor from CN5 on the CPU PC board.

6.

Remove the SM-4x6B screw to detach the strip sensor (LED)/(Tr).

Fig. 3-3

Fig. 3-4

3.2 CUTTER MODULE (B-4205-QM)

NOTE: For the B-570 series, the take-up/cutter harness enclosed with the B-4205-QM is not used but

the take-up harness connected to CN2 on the PWM PC board.

1.

Remove the top cover and left side cover.  (See Fig. 2-1.)

2.

Remove the I/F PC board.  (See Fig. 2-2.)

3.

Remove the front plate.  (See Fig. 2-6.)

4.

Remove the screw (SM-4x8B) and two connectors to detach the operation panel.

Description

Q’ty/Unit

Description

Q’ty/Unit

Cutter Unit

1

Cutter Attaching Screw

2

Cutter Cover

1

Screw (FL-4x6)

1

Take-up/Cutter Harness

1

Cleaner

1

Screw (SM-4x8B)

Connector

Operation Panel

Connector (CN5)

CPU PC Board

Clamp

Strip Sensor (Tr)

Screw (SM-4x6B)

Strip Sensor (LED)