Toshiba 810 User Manual
108
Darkness
Enter the percentage of shading for the watermark text. The shading can be set from 0 (lightest) to 100 (darkest) in units of
1%. You can also set the percentage of shading by moving the scroll bar.
Enter the percentage of shading for the watermark text. The shading can be set from 0 (lightest) to 100 (darkest) in units of
1%. You can also set the percentage of shading by moving the scroll bar.
Angle
Enter the degree of angle for rotating the watermark text. The angle can be set from -180 to 180 degrees in units of 1
degree. You can also set the degree of angle by moving the scroll bar.
Enter the degree of angle for rotating the watermark text. The angle can be set from -180 to 180 degrees in units of 1
degree. You can also set the degree of angle by moving the scroll bar.
[Save]
Click on this to save the new or edited watermark.
Click on this to save the new or edited watermark.
[Cancel]
Click on this to cancel creating a new watermark or editing a watermark and restores the previous screen values.
Click on this to cancel creating a new watermark or editing a watermark and restores the previous screen values.
2
Watermark Image
The image of the new or edited watermark is displayed. You can also adjust the position of the watermark by moving the
horizontal and vertical scroll bars.
The image of the new or edited watermark is displayed. You can also adjust the position of the watermark by moving the
horizontal and vertical scroll bars.
3
Position
This permits setting the position of the watermark using numeric values.
This permits setting the position of the watermark using numeric values.
X Offset
Enter the horizontal position of the watermark. It can be set from -10.00 to 10.00 inch in units of 0.01 inch (-254.00 to
254.00 mm in units of 0.01 mm).
Enter the horizontal position of the watermark. It can be set from -10.00 to 10.00 inch in units of 0.01 inch (-254.00 to
254.00 mm in units of 0.01 mm).
Y Offset
Enter the vertical position of the watermark. It can be set from -10.00 to 10.00 inch in units of 0.01 inch (-254.00 to 254.00
mm in units of 0.01 mm).
Enter the vertical position of the watermark. It can be set from -10.00 to 10.00 inch in units of 0.01 inch (-254.00 to 254.00
mm in units of 0.01 mm).
[Center]
Click on this to center the watermark.
Click on this to center the watermark.