Trendnet TEW-P1U User Manual

 

are damaged. In addition, check the cable connection. If the pins are damaged, contact your 
dealer for a replacement connector. 

Multi-Segment LAN Environment Installation (through the Network Print Port) 
If your print server and Windows 95/98/Me/NT/2000/XP are located on two different 
segments, and your Windows NT server is used as the router/gateway you will need to 
implement the following procedures in order for your print server to function properly: 
 

 

Add the RIP for NWLink IPX/SPX compatible transport. See RIP for NWLink IPX/SPX 
compatible transport Installation Procedure later in this section. 

 

Add the frame type 802.2 for both Ethernet adapters. See Multi-Segment Frame Type 
802.2 Installation later in this section. 

 

 

1.  From your Windows NT server that is used as a router, select Start from the bottom left 

hand corner of the screen. 

2. Select 

Settings. 

3. Select 

Control Panel. 

4. Double-click 

the 

Network icon. 

5. Select 

Services. 

6. Select 

Add. 

7.  In the Select Network Service box, select the RIP for NWLink IPX/SPX compatible 

transport.  Click OK. 

8.  Follows the directions on the screen. 
9. Done! 

 

 
 
 
Multi-Segment Frame Type 802.2 Installation

1.  From your Windows NT server that is used as a router, select Start from the bottom left 

hand corner of the screen. 

2. Point 

to 

Settings, and select Control Panel. 

3. Double-click 

the 

Network icon. 

4. Select 

Protocols. Select the NWLink IPX/SPX Compatible Transport. 

5. Select 

Properties. 

6.  Select your (first) network interface card and select Manual Frame Type Detection. 
7. Click 

Add. 

8. In 

the 

Frame Type field, select Ethernet 802.2. 

9. In 

the 

Network Number field, type in a unique 8-digit hexadecimal network number. For 

example: 12345ABC. 

10. Select Add. 

 

72