DELL C3760dn User Manual
802.1x
Purpose:
To specify the settings for IEEE 802.1x authentication for encrypted communication to the printer.
Values:
To specify the settings for IEEE 802.1x authentication for encrypted communication to the printer.
Values:
Configure 802.1x
Enable IEEE 802.1x
Select the check box to enable IEEE 802.1x authentication.
Authentication Method EAP-MD5
Selects the authentication method to use for IEEE
802.1x authentication.
EAP-MS
CHAPv2
PEAP/MS
PEAP/MS
CHAPv2
EAP-TLS
EAP-TLS
*1, 2
Login Name: (Device
Sets the login name (device name) for IEEE 802.1x authentication using
Name)
up to 128 alphanumeric characters.
Password
Sets the login password for IEEE 802.1x authentication using up to 128
alphanumeric characters.
Re-enter Password
Confirms the set login password.
Certificate Validation
Select the check box to enable Certificate Validation.
*1
This item is displayed only when the optional hard disk is installed and is set to On for encryption.
*2
When this item is selected, Password and Re-enter Password need not to be specified.
IP Filter (IPv4)
Purpose:
To specify the IP address and subnet mask to be permitted or denied access to the printer.
Values:
To specify the IP address and subnet mask to be permitted or denied access to the printer.
Values:
Access List
Address
Sets the IP addresses that are permitted or denied access to the printer. Enter a
numeric value between 0 and 255 in each field.
Address Mask
Sets the subnet mask that are permitted or denied access to the printer. Enter a
numeric value between 0 and 255 in each field.
Active Mode
Reject
Rejects printing from specified network address.
Accept
Permits printing from specified network address.
Off
Disables the IP Filter feature for the specified IP address.
Copy Printer Settings
The Copy Printer Settings menu includes the Copy Printer Settings and Copy Printer Settings Report pages.
Copy Printer Settings
Purpose:
To copy the printer settings to one or more of the same model of the printer.
To copy the settings to another printer, specify the IP address and password of the printer to which the settings are
To copy the printer settings to one or more of the same model of the printer.
To copy the settings to another printer, specify the IP address and password of the printer to which the settings are
copied in the IP Address text box and Password text box. Then, click the Copy the settings to the Host in the above
list button. Copying the settings is complete. The connection time-out period is 60 seconds. After that, you can
check whether the settings were copied to this page. And you need to check the Copy the settings to the Host in the
above list and reboot the printer menu of the Dell Printer Configuration Web Tool in the destination printer to
verify if the settings were actually copied or not.
Dell™ Printer Configuration Web Tool
167