DELL C3760dn User Manual

*1 

HTTP-SSL/TLS feature is available only when a digital certificate is set from the Dell Printer Configuration Web Tool. 

IP Filter feature is available only for 

LPD

 or 

Port9100

. 

Purpose: 
To block data received from certain IP addresses through the wired or wireless network. You can set up to five IP 

addresses. The change becomes effective after the printer is turned off and then on again. 
Values: 

Sets the IP address for Filter

 n

. 

Sets the address mask for Filter 

n

. 

Disables the IP Filter feature for Filter 

n

. 

Accepts an access from the specified IP address. 

Rejects an access from the specified IP address. 

IEEE 802.1x feature is available only when the printer is connected using LAN cable and it is available only when the IEEE 

802.1x authentication is enabled. 

Purpose: 
To disable IEEE 802.1x authentication. The change becomes effective after the printer is turned off and then on 

again. 

Purpose: 
To initialize wired network data stored in non-volatile memory (NVM). After executing this function and rebooting 

the printer, all wired network settings are reset to their default values. 

Purpose: 
To specify PostScript communication protocol for a parallel interface, you can configure the Adobe Protocol 

settings for the wired network. The change becomes effective after the printer is turned off and then on again. 
Values: 

Used when auto-detecting the PostScript communication protocol. 

Used when the communication protocol is in ASCII interface. 

Used when the communication protocol is in binary format. 

Used when the communication protocol supports both ASCII and binary data to switch between them 

according to the specified control code. 

Used when no special processing is required for data. 

Use the USB Settings menu to change printer settings affecting a USB port. 

USB Port feature is available only for the USB port on the rear of the printer. 

Understanding the Printer Menus