Datacard Group CP60 User Manual
Page 28
Use the USB port and a wired print server
1
Connect the print server to the printer using a USB
cable.
cable.
2
Connect the print server to the network using an
Ethernet cable. See the setup information provided with
the print server.
Ethernet cable. See the setup information provided with
the print server.
3
Follow the instructions provided with the print server to
set it up on the network, and then see
set it up on the network, and then see
.
Tips for Success
•
Be sure to record the print server name or IP address,
which you need to send print jobs from a PC. Work with
your network support personnel if needed to obtain the
print server name and IP address.
which you need to send print jobs from a PC. Work with
your network support personnel if needed to obtain the
print server name and IP address.
•
You do not need to perform the steps in
. Instead, set up the print
server on the network (step 3 above).