D-Link DPR-1020 User Manual

Using the Web Configurator 

 

SETUP > LAN Setup 

The LAN Setup screen allows you configure the MFP server’s local network settings. 

Please note that this section is optional and you should not need to change any of 

the settings here to get the MFP server up and running. 

 

These fields allow you to assign an IP address automatically or manually. When 

clicking Manually Assign, you should enter the following information in the boxes: 

IP Address, Subnet Mask, and Default Gateway. 

If you have made changes click Apply Settings to save them or click Cancel to exit.