Casio CW-L300 User Manual

29 

E

This section explains how to align tape label text within a block and how to
align blocks within a tape label.

Example 1: Aligning the term “Round Estimate1

1

1

1

1” in

LEFT

EQUAL

CENTER

RIGHT

■ To align tape label text

In the Free Design Mode, input the text you want, and divide it into blocks

as required.
• See page 22 for information about blocks.

Move the cursor the block whose text you want to align, and then press

FORM.
• Here we will move the cursor to the block that contains “Round”.
• If your label has only one block, advance directly to step 5 of this

procedure.

Use

and

to select BLOCK FORM, and then press SET.

Use

and

to select ONE BLOCK, and then press SET.

Use

and

to scroll to the ALIGN setting screen.

Use

and

to select the alignment setting you want.

• Each press or

and

cycles the setting between EQUAL, CENTER,

RIGHT, and LEFT.

■ To control the overall label length using a fixed tape

In the Free Design Mode, input the text you want.

Press FORM.

• If your label has only one block, advance directly to step 4 of this

procedure.

Use

and

 to select ALL FORM, and then press SET.

Use

and

to scroll to the T-LENGTH setting screen.

Use

and

to change the setting to FIX, and then press

.

Use the number keys, or the

(decrease) and

(increase) keys to

change the label length setting.

• The appearance of the tape length value on the display will change in

accordance with your setting as described below.

Length value becomes highlighted.

[20.6cm]

Label can be printed
as specified.

➜

20.5cm]

Label will be printed but the tape length
will be longer than specified.

➜