Xerox 8500/8550 User Manual
Configuring the Network Address
Phaser® 8500/8550 Color Printer
2-6
Dynamic Methods of Setting the Printer’s IP Address
Set the printer’s IP address using any of the following methods. DHCP is enabled by default on
all Phaser printers.
all Phaser printers.
■
DHCP
■
CentreWare IS
■
AutoIP
Enabling DHCP on the Printer
Verify that the printer DHCP protocol is enabled by setting the control panel or by using
CentreWare IS. DHCP is enabled by default on all Phaser printers.
CentreWare IS. DHCP is enabled by default on all Phaser printers.
Note:
To determine the printer’s IP address, select
Printer Identification
on the control
panel.
See also:
Information Required for Manual IP Addressing
Information
Comments
Internet Protocol (IP) address of the printer
Format is xxx.xxx.xxx.xxx, where xxx represents
a decimal number from 0–255.
a decimal number from 0–255.
Network Mask
If you are unsure, leave this blank; the printer
chooses an appropriate mask.
chooses an appropriate mask.
Default Router/Gateway address
Router address is required to communicate with
the host device from anywhere other than the
local network segment.
the host device from anywhere other than the
local network segment.