Xerox FS-C8008DN User Manual
1.2 Parts and Functions
1-9
1.2.3
Rear
Figure 1-4
1
Vents
Air is purged through these vents to cool down the inside.
2
USB Interface Connector
This connector is a USB interface that conforms to the Full-Speed USB 2.0. Use a USB
cable between this connector and the USB port on a computer.
cable between this connector and the USB port on a computer.
3
Memory Card Slot
This slot receives a memory card. A memory card can hold fonts, macros, forms, etc.,
that can be downloaded in the printer’s memory. For details, see
that can be downloaded in the printer’s memory. For details, see
4
Paper Feeder Right Cover
This cover is opened to clear paper jams in the paper feeder section.
5
Network indicators
These indicators light according to the communication status with the network.
10BASE-T indicator (10): Lights when you are connected to the network at 10 Mbps.
100BASE-TX indicator (100): Lights when you are connected to network at 100 Mbps.
Status indicator (ST): Flashes during data communication.
10BASE-T indicator (10): Lights when you are connected to the network at 10 Mbps.
100BASE-TX indicator (100): Lights when you are connected to network at 100 Mbps.
Status indicator (ST): Flashes during data communication.
6
Network Interface Connector
Connects to the network via a 10BASE-T/100BASE-TX network cable.
7
Parallel Interface Connector
This connector is for a standard Centronics parallel interface cable from the computer.
Connect this connector to the computer’s parallel port.
Connect this connector to the computer’s parallel port.
8
Option Interface Card Slot (Network/Serial) [OPT]
This slot holds an optional network interface card for network printing or a serial
interface board kit. (An optional Hard disk can’t be used in this slot.) For details see
interface board kit. (An optional Hard disk can’t be used in this slot.) For details see
.