Xerox DocuPrint C6 User Guide
48
The document sent to the printer does not
print
Cause
Suggested Solution
The printer cable is not
connected properly.
connected properly.
Unplug the power source. Make
sure the printer cable is securely
connected to the printer and your
PC. Reconnect the power source.
sure the printer cable is securely
connected to the printer and your
PC. Reconnect the power source.
The printer is not mapped to the
local port.
local port.
Map the printer to LPT1. Use the
Windows Details property page
to map the LPT printer port.
Click the <Start> button, point to
Settings, and click Printers.
Click the Xerox DocuPrint C6
icon with the right mouse button,
then click Properties. Click the
Details tab, and check the Print
to the following port. The
printer port is usually LPT1.
Windows Details property page
to map the LPT printer port.
Click the <Start> button, point to
Settings, and click Printers.
Click the Xerox DocuPrint C6
icon with the right mouse button,
then click Properties. Click the
Details tab, and check the Print
to the following port. The
printer port is usually LPT1.
The printer cable is incorrect.
Use an IEEE 1284 compliant
parallel printer cable.
parallel printer cable.
The printer cable is damaged.
Check the printer cable and
replace if damaged.
replace if damaged.
The type of interface is incorrect.
Verify that the computer is using
the parallel interface. Check your
Windows software manual to
ensure that your operating
system software communicates
to the interface port that your
printer is connected to.
Windows software manual to
ensure that your operating
system software communicates
to the interface port that your
printer is connected to.
The front panel LED is blinking
intermittently.
intermittently.
Press and release the Printer
Control (green) button to
continue printing.
Control (green) button to
continue printing.