Xerox EXP250 User Manual

The Cancel on Mismatch option causes a job to be cancelled if the media specified for the job 
(size and weight) is not available. The job is cancelled with an error and moved to the Printed 
queue, allowing the Fiery EXP250 to continue printing other jobs.

The Cancel on Mismatch Timeout option specifies the number of minutes that the 
Fiery EXP250 waits before cancelling a mismatched job. The default setting is 5 minutes, and 
the maximum setting is 999 minutes. To disable this option, set the timeout value to 0.

You can set the Cancel on Mismatch option in Server Setup on the Fiery EXP250 Control 
Panel, or in General Setup on the FACI, if a FACI is installed.

An additional high-capacity feeder paper tray option is supported, Tray 6 (Oversized). Tray 6 
(Oversized) can accommodate the following paper sizes: Letter, Tabloid, Legal, A4, A3, 13

x

9 

SEF, SRA3 SEF, 12x18 SEF, 11

x

17 SEF, A3 SEF, B4 SEF, 8.5

x

14 SEF, 8.5

x

13 SEF, B5 LEF, 

A4 LEF, A4 SEF, 8.5

x

11 SEF, 8.5

x

11 LEF, and PostScript Custom Page Size. The copier can 

be configured with this option instead of the regular Tray 6. 

To print using the Tray 6 (Oversized) option, you must install the updated printer drivers, 
configure the Tray 6 (Oversized) installable option, and set the Paper Source print option to 
Tray 6 (Oversized).

Before using Tray 6 (Oversized) for printing jobs, you must configure the Tray 6 (Oversized) 
installable option in the printer drivers.

For more information on using this utility, see the Printing Utilities chapter of Printing from 
Windows.

For more information, see the Installing Printer Drivers and Setting Up Printing Connections 
chapters of Printing from Windows.