Xerox EXP250 User Manual
Page
6
Updating system software through WebTools
You can also check for system software updates from a secure site on the Internet. Updates to
user software may also be available.
user software may also be available.
T
O
CHECK
FOR
SOFTWARE
UPDATES
1 Start WebTools.
2 Type the Administrator password and click OK.
3 Click Software Updates.
If Software Updates does not appear as one of the WebTools, click Configure and enable it.
4 If an update is available, click the update.
The update is downloaded to the Fiery EXP250.
5 For information about installing the update, click the ReadMe file provided with the update.
Installing the EXP250 SP1 System Software Update from the CD
Before installing this system update, print the Fiery EXP250 Configuration page.
1 Make sure the Fiery EXP250 is Idle and temporarily remove any dongle attached to the
Fiery EXP250.
2 Insert the EXP250 SP1 System Software Update CD into a computer that can print to the
Fiery EXP250 and has Command WorkStation installed.
If Command WorkStation is installed directly on the Fiery EXP250, you can insert the CD in
the DVD drive of the Fiery EXP250.
the DVD drive of the Fiery EXP250.
N
OTE
:
You can also download files from a Windows or a Mac OS computer using
Downloader or WebDownloader. For more information about downloading files using these
utilities, see
utilities, see
Utilities
.
3 Start Command WorkStation and connect to the Fiery EXP250.
If you experience any problems, make sure Setup is configured properly.
4 Choose File>Import>Job from the Command WorkStation menu.
5 Navigate to the “System SW Update.ps” directory on the EXP250 SP1 System Software
Update CD, select the update file, and click Add.
6 Choose the Print or Direct connection from the Logical Printer menu.
7 Click Import and wait for the Fiery EXP250 to reach idle after downloading the update.
You must wait at least 60 seconds after the patch file is imported before rebooting the system.
This will ensure the patch file is completely processed.
This will ensure the patch file is completely processed.
8 Remove the EXP250 SP1 System Software Update CD from the Fiery EXP250 or remote
computer.