Xerox CX User Manual
defined in the PPD file use the default parameters set for that
particular virtual printer.
particular virtual printer.
1. From the Tools menu, select Resource Center.
2. In the Resource list, make sure that Virtual Printers is selected.
3. Click Add (+).
4. In the Name box, type a name for the new printer that you
2. In the Resource list, make sure that Virtual Printers is selected.
3. Click Add (+).
4. In the Name box, type a name for the new printer that you
want to add.
5. From the Based on list, select an existing printer with similar
settings.
6. The Publish on the network check box is selected by default.
Clear the check box if you do not want to publish the printer on
the network.
the network.
7. Select the Override PPD parameters check box if you would
like the virtual printer settings to override the parameters set in
the PPD file.
the PPD file.
8. In the Comments box, type any comment regarding the virtual
printer parameters (optional).
9. Click Edit to change the job parameters of your new virtual
printer.
Note: If you don't edit the job parameters, the settings of the new virtual
printer are taken from the printer on which it was based.
printer are taken from the printer on which it was based.
10. Click OK.
The new printer appears in the virtual printer list.
Removing a virtual printer
The three default virtual printers cannot be deleted.
1. From the Tools menu, select Resource Center.
2. In the Resource list, make sure that Virtual Printers is selected.
3. From the virtual printer list, select the virtual printer that you
2. In the Resource list, make sure that Virtual Printers is selected.
3. From the virtual printer list, select the virtual printer that you
want to delete, and then click Remove (-).
4. Click Yes.
Maintaining your settings
Backing up the configuration
128
Chapter 11—Setting up your color server