Xerox CX User Manual
Loading the Print Driver software for the first time
Requirements:
A network printer must be defined on your computer.
Load the Print Driver software after installing a network printer so
that the CX print server will be ready for printing.
that the CX print server will be ready for printing.
1. Open a file with its corresponding application—for example,
open a PDF file in Adobe Acrobat.
2. From the File menu, select Print.
The Print dialog box appears.
3. Select one of the network printers—for example, Print and
click Properties.
A message tells you that the software is loading.
Note: This process may take a few minutes.
After the software loads successfully, click Finish. The job
parameters window appears.
parameters window appears.
4. Close the job parameters window and printer Print Dialog box
to complete the installation of the Print Driver.
The network printer is set up for printing using the Print Driver
software.
software.
Deactivating the Print Driver software
Deactivate the Print Driver software if you want to access the PPD
file parameters. The Print Driver software is active by default.
file parameters. The Print Driver software is active by default.
1. From the Windows Start menu, select Settings > Printers
and Faxes.
2. Right-click the printer icon of the network printer you want to
deactivate the Print Driver, and select Properties.
3. Click the Print Driver tab.
4. In the Enable enhanced user interface, list select off.
5. Click Apply.
6. Click OK.
4. In the Enable enhanced user interface, list select off.
5. Click Apply.
6. Click OK.
10
Chapter 2—Setting up your computer for printing