Xerox 75 MX User Manual
Operator Guide
Paper and other stock
DocuTech/DocuPrint 75/90 and DocuPrint 75 MX
5-11
Recommendations for handling, loading, and storing paper
Give your paper the proper handling, loading, and storage.
Labels
Self-adhesive
labels for
envelopes and
packaging
labels for
envelopes and
packaging
•
Do not duplex.
•
Feed labels into the printer
LEF only.
LEF only.
Labels pose a special problem
because, depending on the
number of labels per sheet,
there is an opportunity for the
label to separate from the
backing while inside the
printer.
because, depending on the
number of labels per sheet,
there is an opportunity for the
label to separate from the
backing while inside the
printer.
•
Load face-up in Trays 1-4.
•
Load face-down in Trays 5-6.
GBC stock
(Sameceda)
(Sameceda)
Plastic comb or
strap binding via
slotted holes or
rectangles at
frequent intervals
along the long
edge (the bind
edge)
strap binding via
slotted holes or
rectangles at
frequent intervals
along the long
edge (the bind
edge)
•
Load with slotted holes
inboard; for example, load
SEF when the holes are down
the long edge.
inboard; for example, load
SEF when the holes are down
the long edge.
•
Loading with holes on the
lead-edge (LEF) or the trail-
edge (LEF) is not supported,
but may work well for some
stock depending upon the size
and number of the holes and
how they affect the sensors in
the printer; therefore, if you
intend to use LEF you should
run a sample of the stock to
confirm its acceptability before
running the job.
lead-edge (LEF) or the trail-
edge (LEF) is not supported,
but may work well for some
stock depending upon the size
and number of the holes and
how they affect the sensors in
the printer; therefore, if you
intend to use LEF you should
run a sample of the stock to
confirm its acceptability before
running the job.
Table 5-6. Recommendations for loading special stock
Stock Type
Common Use
Recommendation