Xerox EX7750 User Manual

After you perform initial Setup (Server, Network, and Printer Setup) from the Control 
Panel, you can change most Setup options from a Windows computer. 

In addition to using the Control Panel, you can set up the EX7750 in two ways: locally 
and remotely. Local Setup is for systems with the Fiery Advanced Controller Interface 
(FACI). Local Setup uses a Windows XP application, Fiery Server Setup. Remote 
Setup is performed from a Windows computer using Fiery WebSetup or 
Command WorkStation.

In this chapter, illustrations for both Setup interfaces, where applicable, appear 

side by side: local Setup on the left, remote Setup on the right. Descriptions for the 
Setup options are listed in the order in which they appear on the local Setup window. 
Some Setup options cannot be accessed from remote Setup; use local Setup or the 
EX7750 Control Panel instead.

Regardless of how you access Setup, you must log in as Administrator, both at the 
EX7750 and within the Setup application you use. After the EX7750 restarts, log in to 
the Windows XP Logon window with Administrator as the login name and enter the 
password, if required. 

The default password is “Fiery.1”. You are always prompted to enter this 

password unless you have set a new password.

To use the Setup applications (Fiery WebSetup, Command WorkStation or Fiery 
Server Setup), you must enter the EX7750 Administrator password. This is set either 
from the local Setup at the Fiery Server Setup, or remote Setup from Fiery WebSetup 
or Command WorkStation.